What are the working principles of the cooling system of the laser welding machine?

What are the principles of the cooling system of the laser welding machine? The cooling system is one of the key components of the laser welding machine, if the cooling system is abnormal, it will lead to the termination of the operation of the machine and equipment, and even the more serious situation may occur. Therefore, the necessity of cooling system for laser welding machine can be seen.

At this stage, the key to the cooling system of laser welding machine is water-cooled heat dissipation, air-cooled and water-cooled air-cooled in one system software. In which water cooling heat dissipation is widely used. The basic working principle is:

1, the laser welding machine chiller is generally a filter device, can reasonably and effectively overworry the particulate matter residue in the water, maintain the cleaning of the laser hydraulic plunger pump chamber and avoid the probability of plugging.

2, the chiller is applied to mineral water or deionized water, which is more beneficial to the hydraulic plunger pump lamp source directly into the laser chemical substances, which can cause a better laser method.

3, laser welding machine chillers are generally applicable to pressure barometer, can clearly understand the pressure in the laser water channel is how.

4, the chiller is selected to use imported refrigeration compressor, water storage tank and centrifugal pump is stainless steel plate, heat conduction fan coil is also applied stainless steel plate, so thoroughly can ensure the smooth work of the chiller, Shaanxi laser cutting machine manufacturers, the actual effect of cooling is very good, The temperature precision can be 1 ° C, the smaller the temperature is, the less the laser is directly affected by the temperature, but we propose that the temperature difference is adjusted to 1 degree...

5, laser welding machine chiller is generally 220V household power distribution, rather than 380V three-phase electricity, so it is more beneficial to the practicality of the machine equipment.

6, the chiller with the total flow dimension, when the amount of water output is lower than the set, there is a data signal alarm, can be used to maintain the laser and related components to cool.

7, laser welding machine chiller contains temperature maintenance, if the temperature is not suitable, data signal alarm will occur.

8. There are also water-line alerts.

9, there are also a series of control functions, temperature adjustment, temperature difference adjustment, etc.